Page 1 of 1
Help with stage effect.
Posted: April 7th, 2008, 6:06 pm
by Gord
Hello everyone.
I have a small problem and was hoping someone here could provide an answer or two.
I am working on this effect with slates. I will be using photos of famous dead people and have to force one.
What I am looking for is a way top force that photo.
I have considered gluing them onto cards and forcing that way, and possible using roughing fluid, but was wondering if someone knew of any other ways to do this.
Thanks in advance.
Gord
Re: Help with stage effect.
Posted: April 8th, 2008, 6:58 pm
by Pete Biro
What size are the pictures? How many do you use?
Re: Help with stage effect.
Posted: April 9th, 2008, 11:39 am
by Gord
I was thinking either 4x6 or 5x7.
Gord
Re: Help with stage effect.
Posted: April 12th, 2008, 12:57 pm
by Pete Biro
The roughing fluid is probably the simplest. Altho I have used a slate for a force. You have a stack of cards, let them be shuffled, and ask spec to deal them into a pile and stop whenever. You then drop the slate onto the pile (flap has a back design and the force card is on top of the flap). you say the card stopped at will be predicted on the slate. You lift slate they look at card and you turn over the slate and the name is there.
Re: Help with stage effect.
Posted: April 12th, 2008, 2:03 pm
by JimChristianson
How many photos to choose from?
Re: Help with stage effect.
Posted: April 12th, 2008, 4:34 pm
by Gord
JimChristianson wrote:How many photos to choose from?
There will be ten photo's, each one a picture of a historical figures with the years of birth and death on them.
Gord
Re: Help with stage effect.
Posted: April 12th, 2008, 4:36 pm
by Gord
Pete Biro wrote:The roughing fluid is probably the simplest. Altho I have used a slate for a force. You have a stack of cards, let them be shuffled, and ask spec to deal them into a pile and stop whenever. You then drop the slate onto the pile (flap has a back design and the force card is on top of the flap). you say the card stopped at will be predicted on the slate. You lift slate they look at card and you turn over the slate and the name is there.
Interesting. It didn't cross my mind to use the slate like this. I'm going to fiddle around with this idea. Thanks.
Gord
Re: Help with stage effect.
Posted: May 11th, 2008, 6:27 pm
by Larry Barnowsky
Some ideas:
Use double envelope principle so there is a force picture in each envelope.
Put photos and dups in a changebag or a clear force type bag.
You could also make a force pack without roughing fluid so every other card is the force card. It's easy enough to force a photo by asking them for a number and counting to that photo or the one next to it.
Larry